P R O D U C T S
P R O D U C T S
P R O D U C T S
POWER QUALITY DATA CENTER TELECOM RENEWABLE ENERGIES EPI's
Stating its presence in several areas of state-of-the-art technology, mainly electronics and electrical engineering, SENSYS tries to assume a leading position in the energy sector.
SENSYS supplies solutions designed to isolate and protect loads and equipment from several disturbances and anomalies of the electrical power network as well as from atmospheric phenomena. This equipment prevents power cuts and warrants uninterrupted operation. Apart from their corrective action, UPSs also exert a preventive action, informing the user of potential problems, alarms and multiple occurrences. SENSYS’ UPSs adapt to different electrical environments and are equipped with all the accessories, power and safety options. They satisfy specific and strict technical requirements for different applications: computing, laboratory, industry, telecommunications, domestic, corporate, military, etc.
Redundancy/Modular: modular UPSs incorporate state-of-the-art technology and are based in a parallel and redundant module topology (fixed control and hot-swap N+1 module). The design of these UPSs easily allows for its expansion through the addition of high efficiency modules (that may go from tens to hundreds), combined according to need.
VRLA Batteries
SENSYS’ Valve Regulated Lead-Acid (VRLA) batteries incorporate a technology that uses oxygen combination. They are more sensitive than the ventilated batteries and require temperature control. These are closed batteries that use the oxygen cycle as a principle. They have immobilized electrolyte and are equipped with a gas regulator valve for when the accumulator’s internal pressure exceeds the predetermined value.
Valve Regulated Lead-Acid (VRLA)
Condenser Batteries
Condenser batteries work as generators that supply the electronic equipment with the reactive power needed for the conservation of electromagnetic fields, thus preventing high electricity bills from your energy supplier for the consumption of reactive energy.
Capacitor Bank SYS Series
Outdoor Cabinets
SENSYS’ outdoor cabinets are the solution that minimizes telecommunications equipment implementation impact. This solution allows hosting all types of energy and telecommunications equipment, including a variety of refrigeration solutions, significantly reducing local installation and proprietary costs.
Macro Cabinet
Designed for Telecommunications Equipment
Load options - 30 or 40 racks assembly
Direct refrigeration
Heat exchangers
Air conditioning
Compatible with a wide range of Energy systems platforms
Unique design
Midi Cabinet
Designed for Telecommunications IT Equipment
New compact design – 19” rack
48Vdc input and 230Vac output
Input pure sine wave
High power density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
SYS Acess Power System
SENSYS’ modular cabinets were designed for rigid, high reliability and flexibility telecommunications applications. The cabinets’ combination of rectifiers with batteries is configured as to allow the installation of rectifiers with a capacity between 10-kW and 29-kW, together with DC distribution, controller and battery backup in one single footprint.
Modular Cabinet
Designed for Telecommunications Equipment
High density rectifier configurable up to 29-kW
Battery with 710Ah backup per cabinet
System controlled by self-managed operations
Compatible with SNMP and Web
Sophisticated solutions management
Design reliability
Model expandable to hybrid energy systems’ applications
SENSYS’ electric power generators, featuring power between 28kVA and 3250kVA, warrant a high-quality level, as well as efficiency and reliability in their performance.
These groups use motors and alternators of the brands Cummins, John Deere, Volvo, MAN, MTU and Perkins, setting out a versatile, compact and sturdy construction. They assure a high security level for the loads and may be designed and produced in compliance with customer specifications.
Fixed or Automated Construction
- To be installed indoors
The fixed construction electric power generator is destined to be used indoors. It is composed of a diesel engine, an alternator and a control panel assembled on a steel bench, all forming a compact unity.
The automated construction electric power generator assures the automatic start, in case of a power outage or of an automatic stopping after restoration of the power supply. Normally, it is a fixed construction group that incorporates the electrical main board for power outage.
Soundproof or Automated Soundproof Construction
- To be installed outdoors
The soundproof construction electric power generator is designed to be installed outdoors, exposed to the climatic factors and in places where there is the need to limit noise, according to Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors. It is the group bearing the description “fixed” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
The automated soundproof construction electric power generator is also designed to be installed outdoors and it is the group bearing the description “automated” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
Static Transfer Switches (STS) are pieces of equipment used to transfer loads between two independent AC power sources. In the presence of two power sources, primary and secondary, they assure continuous switching between them, and simultaneously, automatic operation (transfer without disruptions) in case of a power outage. This equipment is available in two versions – Single-phase (3-6-10-15-20-30-50-100kVA) and Three-phase (30-60-80-150-250kVA). With two inputs and one output, it has overload protection and null transfer time.
STS SYSLINE
For Server Protection in Racks, IT Applications, Switches and Hubs
Multiple outputs
Elimination of Secondary Rack PDU
Output alternator power
Monitoring and attached alarms
LCD/LED Display Panel
Network Availability Management
HARMONIC FILTER
- SYS Series Modular Active Power Filter
Designed for a 19” rack assembly configuration, SENSYS’ Modular Active Power Filter is comprised by a Control Module, apart from several power modules (4 units maximum).
For Servers, Telecommunications, Network Components, Local Networks, VOIP, Processing Equipment, Telecommunications and Pollution Load
Easily Expandable Modular Design
Up to 51rst harmonics
Up to 12th harmonics
Close/Open Circuit Control
Power Factor Correction Programming
24H DSP Control System
Easy Selection
Derivation Connection for Easy Maintenance
Flexibility/Redundancy
Parallel Operations Diversity
Easy to Use Control Panel
Remote Monitoring and Management is a high availability security base in critical missions that assures maximum productivity. Among other aspects, it allows to control and supervise an IT, communications or telecommunications infrastructure.
SENSYS provides solutions that automate tasks, allowing a proactive resolution of imminent problems. Remote monitoring and management control the active or passive main equipment of a Data Center. A possible failure generates alerts that trigger preventive or corrective actions of the support team.
SYS ACCESS Rectifiers
The rectifier is the central component of a telecommunications power system, it can supply innovative, sturdy and extremely reliable energy. Having as its main aim the continuous enhancement of the total proprietary cost, SYS ACCESS Rectifiers, together with monitoring and management solutions, help to reduce operating costs/expenses. Featuring high power density, they satisfy the relevant technical requirements regarding space and weight, being highly effective in reducing the total consumption of energy, thus minimizing its environmental impact.
SYS ACESS Rack Mount System 6U
For Wireless Base Stations, Remote Computers and Broadband Access
High efficiency >96%
Power density up to 21.5W/in3
Strong input tension
Thermal protection
Flexibility
In accordance with relevant international standards
SYS ACESS Rack Mount System 3U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
High efficiency of the rectifiers
3U Compact/19" Rack Supplies power up to 14.5-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
Battery and load breakers, AC Anti-theft protection and DC Distribution (optional)
SYS ACESS Rack Mount System 2U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
2U Compact/19" Rack Supplies power up to 8.7-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
AC Anti-theft protection and Partial Load Breaker (optional)
IS SYS Inverters
SENSYS’ Inverters are designed to be used in telecommunications applications whenever a reliable AC power supply is needed. IS-SYS’ high efficiency and compact size turn it into an excellent solution for critical power supply of all types of AC equipment.
IS SYS
For Servers, Telecommunications, Network Components, Local Area Networks, VOIP, Processing and Telecommunications Equipment
New compact design x 19" rack
48Vdc input and 230Vac output
Input Pure Sine Wave
High Power Density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
Voltage Stabilizer
For Servers, Telecommunications, Network Components, Local Area Network, VOIP, Processing and Telecommunications Equipment
Servo Motor Controlled Technology
Fast Response to Fluctuations
Reliable Stabilization for Secure Energy
High Efficiency
Short circuit protection
Adaptable to non-linear loads
Manual Bypass Switch
Wide input voltage range version (optional)
Electro-mechanic (Breaker module)
Output with Isolation Transformer (optional)
Digital Display (optional)
High IP Applications (optional)
Independent Tension Regulation (Tri-phase models)
SYS Series AVR 2-30 kVA / 6-1000 kVA
Isolation Transformers
For Numerical Control, Computing, Laboratory and Air Conditioning Equipment
Designed to vary the mains voltage, according to the required value in each application, SYS Power Transformer supplies galvanic isolation, separating primary and secondary circuits. It is also ideal for filtering harmonics and in cases of mains power supply disturbances.
Transformador Trifásico
POWER QUALITY DATA CENTER TELECOM RENEWABLE ENERGIES EPI's
Stating its presence in several areas of state-of-the-art technology, mainly electronics and electrical engineering, SENSYS tries to assume a leading position in the energy sector.
SENSYS supplies solutions designed to isolate and protect loads and equipment from several disturbances and anomalies of the electrical power network as well as from atmospheric phenomena. This equipment prevents power cuts and warrants uninterrupted operation. Apart from their corrective action, UPSs also exert a preventive action, informing the user of potential problems, alarms and multiple occurrences. SENSYS’ UPSs adapt to different electrical environments and are equipped with all the accessories, power and safety options. They satisfy specific and strict technical requirements for different applications: computing, laboratory, industry, telecommunications, domestic, corporate, military, etc.
Redundancy/Modular: modular UPSs incorporate state-of-the-art technology and are based in a parallel and redundant module topology (fixed control and hot-swap N+1 module). The design of these UPSs easily allows for its expansion through the addition of high efficiency modules (that may go from tens to hundreds), combined according to need.
VRLA Batteries
SENSYS’ Valve Regulated Lead-Acid (VRLA) batteries incorporate a technology that uses oxygen combination. They are more sensitive than the ventilated batteries and require temperature control. These are closed batteries that use the oxygen cycle as a principle. They have immobilized electrolyte and are equipped with a gas regulator valve for when the accumulator’s internal pressure exceeds the predetermined value.
Valve Regulated Lead-Acid (VRLA)
Condenser Batteries
Condenser batteries work as generators that supply the electronic equipment with the reactive power needed for the conservation of electromagnetic fields, thus preventing high electricity bills from your energy supplier for the consumption of reactive energy.
Capacitor Bank SYS Series
Outdoor Cabinets
SENSYS’ outdoor cabinets are the solution that minimizes telecommunications equipment implementation impact. This solution allows hosting all types of energy and telecommunications equipment, including a variety of refrigeration solutions, significantly reducing local installation and proprietary costs.
Macro Cabinet
Designed for Telecommunications Equipment
Load options - 30 or 40 racks assembly
Direct refrigeration
Heat exchangers
Air conditioning
Compatible with a wide range of Energy systems platforms
Unique design
Midi Cabinet
Designed for Telecommunications IT Equipment
New compact design – 19” rack
48Vdc input and 230Vac output
Input pure sine wave
High power density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
SYS Acess Power System
SENSYS’ modular cabinets were designed for rigid, high reliability and flexibility telecommunications applications. The cabinets’ combination of rectifiers with batteries is configured as to allow the installation of rectifiers with a capacity between 10-kW and 29-kW, together with DC distribution, controller and battery backup in one single footprint.
Modular Cabinet
Designed for Telecommunications Equipment
High density rectifier configurable up to 29-kW
Battery with 710Ah backup per cabinet
System controlled by self-managed operations
Compatible with SNMP and Web
Sophisticated solutions management
Design reliability
Model expandable to hybrid energy systems’ applications
SENSYS’ electric power generators, featuring power between 28kVA and 3250kVA, warrant a high-quality level, as well as efficiency and reliability in their performance.
These groups use motors and alternators of the brands Cummins, John Deere, Volvo, MAN, MTU and Perkins, setting out a versatile, compact and sturdy construction. They assure a high security level for the loads and may be designed and produced in compliance with customer specifications.
Fixed or Automated Construction
- To be installed indoors
The fixed construction electric power generator is destined to be used indoors. It is composed of a diesel engine, an alternator and a control panel assembled on a steel bench, all forming a compact unity.
The automated construction electric power generator assures the automatic start, in case of a power outage or of an automatic stopping after restoration of the power supply. Normally, it is a fixed construction group that incorporates the electrical main board for power outage.
Soundproof or Automated Soundproof Construction
- To be installed outdoors
The soundproof construction electric power generator is designed to be installed outdoors, exposed to the climatic factors and in places where there is the need to limit noise, according to Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors. It is the group bearing the description “fixed” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
The automated soundproof construction electric power generator is also designed to be installed outdoors and it is the group bearing the description “automated” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
Static Transfer Switches (STS) are pieces of equipment used to transfer loads between two independent AC power sources. In the presence of two power sources, primary and secondary, they assure continuous switching between them, and simultaneously, automatic operation (transfer without disruptions) in case of a power outage. This equipment is available in two versions – Single-phase (3-6-10-15-20-30-50-100kVA) and Three-phase (30-60-80-150-250kVA). With two inputs and one output, it has overload protection and null transfer time.
STS SYSLINE
For Server Protection in Racks, IT Applications, Switches and Hubs
Multiple outputs
Elimination of Secondary Rack PDU
Output alternator power
Monitoring and attached alarms
LCD/LED Display Panel
Network Availability Management
HARMONIC FILTER
- SYS Series Modular Active Power Filter
Designed for a 19” rack assembly configuration, SENSYS’ Modular Active Power Filter is comprised by a Control Module, apart from several power modules (4 units maximum).
For Servers, Telecommunications, Network Components, Local Networks, VOIP, Processing Equipment, Telecommunications and Pollution Load
Easily Expandable Modular Design
Up to 51rst harmonics
Up to 12th harmonics
Close/Open Circuit Control
Power Factor Correction Programming
24H DSP Control System
Easy Selection
Derivation Connection for Easy Maintenance
Flexibility/Redundancy
Parallel Operations Diversity
Easy to Use Control Panel
Remote Monitoring and Management is a high availability security base in critical missions that assures maximum productivity. Among other aspects, it allows to control and supervise an IT, communications or telecommunications infrastructure.
SENSYS provides solutions that automate tasks, allowing a proactive resolution of imminent problems. Remote monitoring and management control the active or passive main equipment of a Data Center. A possible failure generates alerts that trigger preventive or corrective actions of the support team.
SYS ACCESS Rectifiers
The rectifier is the central component of a telecommunications power system, it can supply innovative, sturdy and extremely reliable energy. Having as its main aim the continuous enhancement of the total proprietary cost, SYS ACCESS Rectifiers, together with monitoring and management solutions, help to reduce operating costs/expenses. Featuring high power density, they satisfy the relevant technical requirements regarding space and weight, being highly effective in reducing the total consumption of energy, thus minimizing its environmental impact.
SYS ACESS Rack Mount System 6U
For Wireless Base Stations, Remote Computers and Broadband Access
High efficiency >96%
Power density up to 21.5W/in3
Strong input tension
Thermal protection
Flexibility
In accordance with relevant international standards
SYS ACESS Rack Mount System 3U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
High efficiency of the rectifiers
3U Compact/19" Rack Supplies power up to 14.5-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
Battery and load breakers, AC Anti-theft protection and DC Distribution (optional)
SYS ACESS Rack Mount System 2U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
2U Compact/19" Rack Supplies power up to 8.7-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
AC Anti-theft protection and Partial Load Breaker (optional)
IS SYS Inverters
SENSYS’ Inverters are designed to be used in telecommunications applications whenever a reliable AC power supply is needed. IS-SYS’ high efficiency and compact size turn it into an excellent solution for critical power supply of all types of AC equipment.
IS SYS
For Servers, Telecommunications, Network Components, Local Area Networks, VOIP, Processing and Telecommunications Equipment
New compact design x 19" rack
48Vdc input and 230Vac output
Input Pure Sine Wave
High Power Density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
Voltage Stabilizer
For Servers, Telecommunications, Network Components, Local Area Network, VOIP, Processing and Telecommunications Equipment
Servo Motor Controlled Technology
Fast Response to Fluctuations
Reliable Stabilization for Secure Energy
High Efficiency
Short circuit protection
Adaptable to non-linear loads
Manual Bypass Switch
Wide input voltage range version (optional)
Electro-mechanic (Breaker module)
Output with Isolation Transformer (optional)
Digital Display (optional)
High IP Applications (optional)
Independent Tension Regulation (Tri-phase models)
SYS Series AVR 2-30 kVA / 6-1000 kVA
Isolation Transformers
For Numerical Control, Computing, Laboratory and Air Conditioning Equipment
Designed to vary the mains voltage, according to the required value in each application, SYS Power Transformer supplies galvanic isolation, separating primary and secondary circuits. It is also ideal for filtering harmonics and in cases of mains power supply disturbances.
Transformador Trifásico
POWER QUALITY DATA CENTER TELECOM RENEWABLE ENERGIES EPI's
Stating its presence in several areas of state-of-the-art technology, mainly electronics and electrical engineering, SENSYS tries to assume a leading position in the energy sector.
SENSYS supplies solutions designed to isolate and protect loads and equipment from several disturbances and anomalies of the electrical power network as well as from atmospheric phenomena. This equipment prevents power cuts and warrants uninterrupted operation. Apart from their corrective action, UPSs also exert a preventive action, informing the user of potential problems, alarms and multiple occurrences. SENSYS’ UPSs adapt to different electrical environments and are equipped with all the accessories, power and safety options. They satisfy specific and strict technical requirements for different applications: computing, laboratory, industry, telecommunications, domestic, corporate, military, etc.
Redundancy/Modular: modular UPSs incorporate state-of-the-art technology and are based in a parallel and redundant module topology (fixed control and hot-swap N+1 module). The design of these UPSs easily allows for its expansion through the addition of high efficiency modules (that may go from tens to hundreds), combined according to need.
VRLA Batteries
SENSYS’ Valve Regulated Lead-Acid (VRLA) batteries incorporate a technology that uses oxygen combination. They are more sensitive than the ventilated batteries and require temperature control. These are closed batteries that use the oxygen cycle as a principle. They have immobilized electrolyte and are equipped with a gas regulator valve for when the accumulator’s internal pressure exceeds the predetermined value.
Valve Regulated Lead-Acid (VRLA)
Condenser Batteries
Condenser batteries work as generators that supply the electronic equipment with the reactive power needed for the conservation of electromagnetic fields, thus preventing high electricity bills from your energy supplier for the consumption of reactive energy.
Capacitor Bank SYS Series
Outdoor Cabinets
SENSYS’ outdoor cabinets are the solution that minimizes telecommunications equipment implementation impact. This solution allows hosting all types of energy and telecommunications equipment, including a variety of refrigeration solutions, significantly reducing local installation and proprietary costs.
Macro Cabinet
Designed for Telecommunications Equipment
Load options - 30 or 40 racks assembly
Direct refrigeration
Heat exchangers
Air conditioning
Compatible with a wide range of Energy systems platforms
Unique design
Midi Cabinet
Designed for Telecommunications IT Equipment
New compact design – 19” rack
48Vdc input and 230Vac output
Input pure sine wave
High power density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
SYS Acess Power System
SENSYS’ modular cabinets were designed for rigid, high reliability and flexibility telecommunications applications. The cabinets’ combination of rectifiers with batteries is configured as to allow the installation of rectifiers with a capacity between 10-kW and 29-kW, together with DC distribution, controller and battery backup in one single footprint.
Modular Cabinet
Designed for Telecommunications Equipment
High density rectifier configurable up to 29-kW
Battery with 710Ah backup per cabinet
System controlled by self-managed operations
Compatible with SNMP and Web
Sophisticated solutions management
Design reliability
Model expandable to hybrid energy systems’ applications
SENSYS’ electric power generators, featuring power between 28kVA and 3250kVA, warrant a high-quality level, as well as efficiency and reliability in their performance.
These groups use motors and alternators of the brands Cummins, John Deere, Volvo, MAN, MTU and Perkins, setting out a versatile, compact and sturdy construction. They assure a high security level for the loads and may be designed and produced in compliance with customer specifications.
Fixed or Automated Construction
- To be installed indoors
The fixed construction electric power generator is destined to be used indoors. It is composed of a diesel engine, an alternator and a control panel assembled on a steel bench, all forming a compact unity.
The automated construction electric power generator assures the automatic start, in case of a power outage or of an automatic stopping after restoration of the power supply. Normally, it is a fixed construction group that incorporates the electrical main board for power outage.
Soundproof or Automated Soundproof Construction
- To be installed outdoors
The soundproof construction electric power generator is designed to be installed outdoors, exposed to the climatic factors and in places where there is the need to limit noise, according to Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors. It is the group bearing the description “fixed” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
The automated soundproof construction electric power generator is also designed to be installed outdoors and it is the group bearing the description “automated” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
Static Transfer Switches (STS) are pieces of equipment used to transfer loads between two independent AC power sources. In the presence of two power sources, primary and secondary, they assure continuous switching between them, and simultaneously, automatic operation (transfer without disruptions) in case of a power outage. This equipment is available in two versions – Single-phase (3-6-10-15-20-30-50-100kVA) and Three-phase (30-60-80-150-250kVA). With two inputs and one output, it has overload protection and null transfer time.
STS SYSLINE
For Server Protection in Racks, IT Applications, Switches and Hubs
Multiple outputs
Elimination of Secondary Rack PDU
Output alternator power
Monitoring and attached alarms
LCD/LED Display Panel
Network Availability Management
HARMONIC FILTER
- SYS Series Modular Active Power Filter
Designed for a 19” rack assembly configuration, SENSYS’ Modular Active Power Filter is comprised by a Control Module, apart from several power modules (4 units maximum).
For Servers, Telecommunications, Network Components, Local Networks, VOIP, Processing Equipment, Telecommunications and Pollution Load
Easily Expandable Modular Design
Up to 51rst harmonics
Up to 12th harmonics
Close/Open Circuit Control
Power Factor Correction Programming
24H DSP Control System
Easy Selection
Derivation Connection for Easy Maintenance
Flexibility/Redundancy
Parallel Operations Diversity
Easy to Use Control Panel
Remote Monitoring and Management is a high availability security base in critical missions that assures maximum productivity. Among other aspects, it allows to control and supervise an IT, communications or telecommunications infrastructure.
SENSYS provides solutions that automate tasks, allowing a proactive resolution of imminent problems. Remote monitoring and management control the active or passive main equipment of a Data Center. A possible failure generates alerts that trigger preventive or corrective actions of the support team.
SYS ACCESS Rectifiers
The rectifier is the central component of a telecommunications power system, it can supply innovative, sturdy and extremely reliable energy. Having as its main aim the continuous enhancement of the total proprietary cost, SYS ACCESS Rectifiers, together with monitoring and management solutions, help to reduce operating costs/expenses. Featuring high power density, they satisfy the relevant technical requirements regarding space and weight, being highly effective in reducing the total consumption of energy, thus minimizing its environmental impact.
SYS ACESS Rack Mount System 6U
For Wireless Base Stations, Remote Computers and Broadband Access
High efficiency >96%
Power density up to 21.5W/in3
Strong input tension
Thermal protection
Flexibility
In accordance with relevant international standards
SYS ACESS Rack Mount System 3U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
High efficiency of the rectifiers
3U Compact/19" Rack Supplies power up to 14.5-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
Battery and load breakers, AC Anti-theft protection and DC Distribution (optional)
SYS ACESS Rack Mount System 2U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
2U Compact/19" Rack Supplies power up to 8.7-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
AC Anti-theft protection and Partial Load Breaker (optional)
IS SYS Inverters
SENSYS’ Inverters are designed to be used in telecommunications applications whenever a reliable AC power supply is needed. IS-SYS’ high efficiency and compact size turn it into an excellent solution for critical power supply of all types of AC equipment.
IS SYS
For Servers, Telecommunications, Network Components, Local Area Networks, VOIP, Processing and Telecommunications Equipment
New compact design x 19" rack
48Vdc input and 230Vac output
Input Pure Sine Wave
High Power Density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
Voltage Stabilizer
For Servers, Telecommunications, Network Components, Local Area Network, VOIP, Processing and Telecommunications Equipment
Servo Motor Controlled Technology
Fast Response to Fluctuations
Reliable Stabilization for Secure Energy
High Efficiency
Short circuit protection
Adaptable to non-linear loads
Manual Bypass Switch
Wide input voltage range version (optional)
Electro-mechanic (Breaker module)
Output with Isolation Transformer (optional)
Digital Display (optional)
High IP Applications (optional)
Independent Tension Regulation (Tri-phase models)
SYS Series AVR 2-30 kVA / 6-1000 kVA
Isolation Transformers
For Numerical Control, Computing, Laboratory and Air Conditioning Equipment
Designed to vary the mains voltage, according to the required value in each application, SYS Power Transformer supplies galvanic isolation, separating primary and secondary circuits. It is also ideal for filtering harmonics and in cases of mains power supply disturbances.
Transformador Trifásico
POWER QUALITY DATA CENTER TELECOM
Stating its presence in several areas of state-of-the-art technology, mainly electronics and electrical engineering, SENSYS tries to assume a leading position in the energy sector.
SENSYS supplies solutions designed to isolate and protect loads and equipment from several disturbances and anomalies of the electrical power network as well as from atmospheric phenomena. This equipment prevents power cuts and warrants uninterrupted operation. Apart from their corrective action, UPSs also exert a preventive action, informing the user of potential problems, alarms and multiple occurrences. SENSYS’ UPSs adapt to different electrical environments and are equipped with all the accessories, power and safety options. They satisfy specific and strict technical requirements for different applications: computing, laboratory, industry, telecommunications, domestic, corporate, military, etc.
Redundancy/Modular: modular UPSs incorporate state-of-the-art technology and are based in a parallel and redundant module topology (fixed control and hot-swap N+1 module). The design of these UPSs easily allows for its expansion through the addition of high efficiency modules (that may go from tens to hundreds), combined according to need.
VRLA Batteries
SENSYS’ Valve Regulated Lead-Acid (VRLA) batteries incorporate a technology that uses oxygen combination. They are more sensitive than the ventilated batteries and require temperature control. These are closed batteries that use the oxygen cycle as a principle. They have immobilized electrolyte and are equipped with a gas regulator valve for when the accumulator’s internal pressure exceeds the predetermined value.
Valve Regulated Lead-Acid (VRLA)
Condenser Batteries
Condenser batteries work as generators that supply the electronic equipment with the reactive power needed for the conservation of electromagnetic fields, thus preventing high electricity bills from your energy supplier for the consumption of reactive energy.
Capacitor Bank SYS Series
Outdoor Cabinets
SENSYS’ outdoor cabinets are the solution that minimizes telecommunications equipment implementation impact. This solution allows hosting all types of energy and telecommunications equipment, including a variety of refrigeration solutions, significantly reducing local installation and proprietary costs.
Macro Cabinet
Designed for Telecommunications Equipment
Load options - 30 or 40 racks assembly
Direct refrigeration
Heat exchangers
Air conditioning
Compatible with a wide range of Energy systems platforms
Unique design
Midi Cabinet
Designed for Telecommunications IT Equipment
New compact design – 19” rack
48Vdc input and 230Vac output
Input pure sine wave
High power density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
SYS Acess Power System
SENSYS’ modular cabinets were designed for rigid, high reliability and flexibility telecommunications applications. The cabinets’ combination of rectifiers with batteries is configured as to allow the installation of rectifiers with a capacity between 10-kW and 29-kW, together with DC distribution, controller and battery backup in one single footprint.
Modular Cabinet
Designed for Telecommunications Equipment
High density rectifier configurable up to 29-kW
Battery with 710Ah backup per cabinet
System controlled by self-managed operations
Compatible with SNMP and Web
Sophisticated solutions management
Design reliability
Model expandable to hybrid energy systems’ applications
SENSYS’ electric power generators, featuring power between 28kVA and 3250kVA, warrant a high-quality level, as well as efficiency and reliability in their performance.
These groups use motors and alternators of the brands Cummins, John Deere, Volvo, MAN, MTU and Perkins, setting out a versatile, compact and sturdy construction. They assure a high security level for the loads and may be designed and produced in compliance with customer specifications.
Fixed or Automated Construction
- To be installed indoors
The fixed construction electric power generator is destined to be used indoors. It is composed of a diesel engine, an alternator and a control panel assembled on a steel bench, all forming a compact unity.
The automated construction electric power generator assures the automatic start, in case of a power outage or of an automatic stopping after restoration of the power supply. Normally, it is a fixed construction group that incorporates the electrical main board for power outage.
Soundproof or Automated Soundproof Construction
- To be installed outdoors
The soundproof construction electric power generator is designed to be installed outdoors, exposed to the climatic factors and in places where there is the need to limit noise, according to Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors. It is the group bearing the description “fixed” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
The automated soundproof construction electric power generator is also designed to be installed outdoors and it is the group bearing the description “automated” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
Static Transfer Switches (STS) are pieces of equipment used to transfer loads between two independent AC power sources. In the presence of two power sources, primary and secondary, they assure continuous switching between them, and simultaneously, automatic operation (transfer without disruptions) in case of a power outage. This equipment is available in two versions – Single-phase (3-6-10-15-20-30-50-100kVA) and Three-phase (30-60-80-150-250kVA). With two inputs and one output, it has overload protection and null transfer time.
STS SYSLINE
For Server Protection in Racks, IT Applications, Switches and Hubs
Multiple outputs
Elimination of Secondary Rack PDU
Output alternator power
Monitoring and attached alarms
LCD/LED Display Panel
Network Availability Management
HARMONIC FILTER
- SYS Series Modular Active Power Filter
Designed for a 19” rack assembly configuration, SENSYS’ Modular Active Power Filter is comprised by a Control Module, apart from several power modules (4 units maximum).
For Servers, Telecommunications, Network Components, Local Networks, VOIP, Processing Equipment, Telecommunications and Pollution Load
Easily Expandable Modular Design
Up to 51rst harmonics
Up to 12th harmonics
Close/Open Circuit Control
Power Factor Correction Programming
24H DSP Control System
Easy Selection
Derivation Connection for Easy Maintenance
Flexibility/Redundancy
Parallel Operations Diversity
Easy to Use Control Panel
Remote Monitoring and Management is a high availability security base in critical missions that assures maximum productivity. Among other aspects, it allows to control and supervise an IT, communications or telecommunications infrastructure.
SENSYS provides solutions that automate tasks, allowing a proactive resolution of imminent problems. Remote monitoring and management control the active or passive main equipment of a Data Center. A possible failure generates alerts that trigger preventive or corrective actions of the support team.
SYS ACCESS Rectifiers
The rectifier is the central component of a telecommunications power system, it can supply innovative, sturdy and extremely reliable energy. Having as its main aim the continuous enhancement of the total proprietary cost, SYS ACCESS Rectifiers, together with monitoring and management solutions, help to reduce operating costs/expenses. Featuring high power density, they satisfy the relevant technical requirements regarding space and weight, being highly effective in reducing the total consumption of energy, thus minimizing its environmental impact.
SYS ACESS Rack Mount System 6U
For Wireless Base Stations, Remote Computers and Broadband Access
High efficiency >96%
Power density up to 21.5W/in3
Strong input tension
Thermal protection
Flexibility
In accordance with relevant international standards
SYS ACESS Rack Mount System 3U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
High efficiency of the rectifiers
3U Compact/19" Rack Supplies power up to 14.5-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
Battery and load breakers, AC Anti-theft protection and DC Distribution (optional)
SYS ACESS Rack Mount System 2U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
2U Compact/19" Rack Supplies power up to 8.7-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
AC Anti-theft protection and Partial Load Breaker (optional)
IS SYS Inverters
SENSYS’ Inverters are designed to be used in telecommunications applications whenever a reliable AC power supply is needed. IS-SYS’ high efficiency and compact size turn it into an excellent solution for critical power supply of all types of AC equipment.
IS SYS
For Servers, Telecommunications, Network Components, Local Area Networks, VOIP, Processing and Telecommunications Equipment
New compact design x 19" rack
48Vdc input and 230Vac output
Input Pure Sine Wave
High Power Density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
Voltage Stabilizer
For Servers, Telecommunications, Network Components, Local Area Network, VOIP, Processing and Telecommunications Equipment
Servo Motor Controlled Technology
Fast Response to Fluctuations
Reliable Stabilization for Secure Energy
High Efficiency
Short circuit protection
Adaptable to non-linear loads
Manual Bypass Switch
Wide input voltage range version (optional)
Electro-mechanic (Breaker module)
Output with Isolation Transformer (optional)
Digital Display (optional)
High IP Applications (optional)
Independent Tension Regulation (Tri-phase models)
SYS Series AVR 2-30 kVA / 6-1000 kVA
Isolation Transformers
For Numerical Control, Computing, Laboratory and Air Conditioning Equipment
Designed to vary the mains voltage, according to the required value in each application, SYS Power Transformer supplies galvanic isolation, separating primary and secondary circuits. It is also ideal for filtering harmonics and in cases of mains power supply disturbances.
Transformador Trifásico
POWER QUALITY DATA CENTER TELECOM RENEWABLE ENERGIES EPI's
Stating its presence in several areas of state-of-the-art technology, mainly electronics and electrical engineering, SENSYS tries to assume a leading position in the energy sector.
SENSYS supplies solutions designed to isolate and protect loads and equipment from several disturbances and anomalies of the electrical power network as well as from atmospheric phenomena. This equipment prevents power cuts and warrants uninterrupted operation. Apart from their corrective action, UPSs also exert a preventive action, informing the user of potential problems, alarms and multiple occurrences. SENSYS’ UPSs adapt to different electrical environments and are equipped with all the accessories, power and safety options. They satisfy specific and strict technical requirements for different applications: computing, laboratory, industry, telecommunications, domestic, corporate, military, etc.
Redundancy/Modular: modular UPSs incorporate state-of-the-art technology and are based in a parallel and redundant module topology (fixed control and hot-swap N+1 module). The design of these UPSs easily allows for its expansion through the addition of high efficiency modules (that may go from tens to hundreds), combined according to need.
VRLA Batteries
SENSYS’ Valve Regulated Lead-Acid (VRLA) batteries incorporate a technology that uses oxygen combination. They are more sensitive than the ventilated batteries and require temperature control. These are closed batteries that use the oxygen cycle as a principle. They have immobilized electrolyte and are equipped with a gas regulator valve for when the accumulator’s internal pressure exceeds the predetermined value.
Valve Regulated Lead-Acid (VRLA)
Condenser Batteries
Condenser batteries work as generators that supply the electronic equipment with the reactive power needed for the conservation of electromagnetic fields, thus preventing high electricity bills from your energy supplier for the consumption of reactive energy.
Capacitor Bank SYS Series
Outdoor Cabinets
SENSYS’ outdoor cabinets are the solution that minimizes telecommunications equipment implementation impact. This solution allows hosting all types of energy and telecommunications equipment, including a variety of refrigeration solutions, significantly reducing local installation and proprietary costs.
Macro Cabinet
Designed for Telecommunications Equipment
Load options - 30 or 40 racks assembly
Direct refrigeration
Heat exchangers
Air conditioning
Compatible with a wide range of Energy systems platforms
Unique design
Midi Cabinet
Designed for Telecommunications IT Equipment
New compact design – 19” rack
48Vdc input and 230Vac output
Input pure sine wave
High power density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
SYS Acess Power System
SENSYS’ modular cabinets were designed for rigid, high reliability and flexibility telecommunications applications. The cabinets’ combination of rectifiers with batteries is configured as to allow the installation of rectifiers with a capacity between 10-kW and 29-kW, together with DC distribution, controller and battery backup in one single footprint.
Modular Cabinet
Designed for Telecommunications Equipment
High density rectifier configurable up to 29-kW
Battery with 710Ah backup per cabinet
System controlled by self-managed operations
Compatible with SNMP and Web
Sophisticated solutions management
Design reliability
Model expandable to hybrid energy systems’ applications
SENSYS’ electric power generators, featuring power between 28kVA and 3250kVA, warrant a high-quality level, as well as efficiency and reliability in their performance.
These groups use motors and alternators of the brands Cummins, John Deere, Volvo, MAN, MTU and Perkins, setting out a versatile, compact and sturdy construction. They assure a high security level for the loads and may be designed and produced in compliance with customer specifications.
Fixed or Automated Construction
- To be installed indoors
The fixed construction electric power generator is destined to be used indoors. It is composed of a diesel engine, an alternator and a control panel assembled on a steel bench, all forming a compact unity.
The automated construction electric power generator assures the automatic start, in case of a power outage or of an automatic stopping after restoration of the power supply. Normally, it is a fixed construction group that incorporates the electrical main board for power outage.
Soundproof or Automated Soundproof Construction
- To be installed outdoors
The soundproof construction electric power generator is designed to be installed outdoors, exposed to the climatic factors and in places where there is the need to limit noise, according to Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors. It is the group bearing the description “fixed” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
The automated soundproof construction electric power generator is also designed to be installed outdoors and it is the group bearing the description “automated” construction, comprised by a soundproof metallic cover and a high noise reduction exhaust silencer.
Static Transfer Switches (STS) are pieces of equipment used to transfer loads between two independent AC power sources. In the presence of two power sources, primary and secondary, they assure continuous switching between them, and simultaneously, automatic operation (transfer without disruptions) in case of a power outage. This equipment is available in two versions – Single-phase (3-6-10-15-20-30-50-100kVA) and Three-phase (30-60-80-150-250kVA). With two inputs and one output, it has overload protection and null transfer time.
STS SYSLINE
For Server Protection in Racks, IT Applications, Switches and Hubs
Multiple outputs
Elimination of Secondary Rack PDU
Output alternator power
Monitoring and attached alarms
LCD/LED Display Panel
Network Availability Management
HARMONIC FILTER
- SYS Series Modular Active Power Filter
Designed for a 19” rack assembly configuration, SENSYS’ Modular Active Power Filter is comprised by a Control Module, apart from several power modules (4 units maximum).
For Servers, Telecommunications, Network Components, Local Networks, VOIP, Processing Equipment, Telecommunications and Pollution Load
Easily Expandable Modular Design
Up to 51rst harmonics
Up to 12th harmonics
Close/Open Circuit Control
Power Factor Correction Programming
24H DSP Control System
Easy Selection
Derivation Connection for Easy Maintenance
Flexibility/Redundancy
Parallel Operations Diversity
Easy to Use Control Panel
Remote Monitoring and Management is a high availability security base in critical missions that assures maximum productivity. Among other aspects, it allows to control and supervise an IT, communications or telecommunications infrastructure.
SENSYS provides solutions that automate tasks, allowing a proactive resolution of imminent problems. Remote monitoring and management control the active or passive main equipment of a Data Center. A possible failure generates alerts that trigger preventive or corrective actions of the support team.
SYS ACCESS Rectifiers
The rectifier is the central component of a telecommunications power system, it can supply innovative, sturdy and extremely reliable energy. Having as its main aim the continuous enhancement of the total proprietary cost, SYS ACCESS Rectifiers, together with monitoring and management solutions, help to reduce operating costs/expenses. Featuring high power density, they satisfy the relevant technical requirements regarding space and weight, being highly effective in reducing the total consumption of energy, thus minimizing its environmental impact.
SYS ACESS Rack Mount System 6U
For Wireless Base Stations, Remote Computers and Broadband Access
High efficiency >96%
Power density up to 21.5W/in3
Strong input tension
Thermal protection
Flexibility
In accordance with relevant international standards
SYS ACESS Rack Mount System 3U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
High efficiency of the rectifiers
3U Compact/19" Rack Supplies power up to 14.5-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
Battery and load breakers, AC Anti-theft protection and DC Distribution (optional)
SYS ACESS Rack Mount System 2U
For Telecommunications Applications, Radio Stations and Broadband Nodes
High power intensity of the rectifier modules
2U Compact/19" Rack Supplies power up to 8.7-kW
Compatible with SNMP and Web
Intelligent Management Solutions
Design reliability
AC Anti-theft protection and Partial Load Breaker (optional)
IS SYS Inverters
SENSYS’ Inverters are designed to be used in telecommunications applications whenever a reliable AC power supply is needed. IS-SYS’ high efficiency and compact size turn it into an excellent solution for critical power supply of all types of AC equipment.
IS SYS
For Servers, Telecommunications, Network Components, Local Area Networks, VOIP, Processing and Telecommunications Equipment
New compact design x 19" rack
48Vdc input and 230Vac output
Input Pure Sine Wave
High Power Density
LED with easy-to-read keyboard
Wide selection of configurable parameters
Internal electronic bypass
Voltage Stabilizer
For Servers, Telecommunications, Network Components, Local Area Network, VOIP, Processing and Telecommunications Equipment
Servo Motor Controlled Technology
Fast Response to Fluctuations
Reliable Stabilization for Secure Energy
High Efficiency
Short circuit protection
Adaptable to non-linear loads
Manual Bypass Switch
Wide input voltage range version (optional)
Electro-mechanic (Breaker module)
Output with Isolation Transformer (optional)
Digital Display (optional)
High IP Applications (optional)
Independent Tension Regulation (Tri-phase models)
SYS Series AVR 2-30 kVA / 6-1000 kVA
Isolation Transformers
For Numerical Control, Computing, Laboratory and Air Conditioning Equipment
Designed to vary the mains voltage, according to the required value in each application, SYS Power Transformer supplies galvanic isolation, separating primary and secondary circuits. It is also ideal for filtering harmonics and in cases of mains power supply disturbances.
Transformador Trifásico